Notifications
Back

BIOCERA Product Quality Assurance


BIOCERA A.A JUG Filter Cartridge Reliability of Over 99.9% Quality Assurance

- Test conditions: Filter tap water (pH 7.3) into the BIOCERA A.A Jug filter cartridge up to 150L

  (Room temperature)

Specification:

 pH 8.5 or higher

  • Process capability: As a quality management index based on Six Sigma management techniques, product performance meets customer specifications. It indicates how satisfied they are and is expressed as a process capability index (Cpk, Ppk) (1.67 or more: very sufficient, 1.33 or more: sufficient, 1.00 or more: good, 0.67 or more: insufficient, less than 0.67: very insufficient)
  • Cpk: Process capability index obtained using only within-group variation and short-term standard deviation
  • Ppk: Capability index calculated using long-term standard deviation including both within-group and between-group variability
  • PPM: Estimated defect rate (ratio of defects per million products) 0.0% (99.9% or more in good quality)

BIOCERA 8" A.A Filter Cartridge Reliability of Over 99.9% Quality Assurance

- Test conditions: Filter RO water (pH 6.0) into the BIOCERA 8" A.A filter cartridge up to 3,000L 

  (Flow rate 0.3 LPM, room temperature)

Specification:

 pH 8.5 or higher

  • Process capability: As a quality management index based on Six Sigma management techniques, product performance meets customer specifications. It indicates how satisfied they are and is expressed as a process capability index (Cpk, Ppk) (1.67 or more: very sufficient, 1.33 or more: sufficient, 1.00 or more: good, 0.67 or more: insufficient, less than 0.67: very insufficient)
  • Cpk: Process capability index obtained using only within-group variation and short-term standard deviation
  • Ppk: Capability index calculated using long-term standard deviation including both within-group and between-group variability
  • PPM: Estimated defect rate (ratio of defects per million products) 0.0% (99.9% or more in good quality)

BIOCERA 8" A.A Filter Cartridge Reliability of Over 99.9% Quality Assurance

- Test conditions: Filter RO water (pH 6.0) into the BIOCERA 8" A.A filter cartridge up to 3,000L 

  (Flow rate 0.3 LPM, room temperature)

Specification: 

 pH 9.0 or higher

  • Process capability: As a quality management index based on Six Sigma management techniques, product performance meets customer specifications. It indicates how satisfied they are and is expressed as a process capability index (Cpk, Ppk) (1.67 or more: very sufficient, 1.33 or more: sufficient, 1.00 or more: good, 0.67 or more: insufficient, less than 0.67: very insufficient)
  • Cpk: Process capability index obtained using only within-group variation and short-term standard deviation
  • Ppk: Capability index calculated using long-term standard deviation including both within-group and between-group variability
  • PPM: Estimated defect rate (ratio of defects per million products) 0.0% (99.9% or more in good quality)

BIOCERA 10" A.A Filter Cartridge Reliability of Over 99.9% Quality Assurance

- Test conditions: Filter RO water (pH 6.0) into the BIOCERA 10" A.A filter cartridge up to 3,000L 

  (Flow rate 0.3 LPM, room temperature)

Specification: 

 pH 8.5 or higher

  • Process capability: As a quality management index based on Six Sigma management techniques, product performance meets customer specifications. It indicates how satisfied they are and is expressed as a process capability index (Cpk, Ppk) (1.67 or more: very sufficient, 1.33 or more: sufficient, 1.00 or more: good, 0.67 or more: insufficient, less than 0.67: very insufficient)
  • Cpk: Process capability index obtained using only within-group variation and short-term standard deviation
  • Ppk: Capability index calculated using long-term standard deviation including both within-group and between-group variability
  • PPM: Estimated defect rate (ratio of defects per million products) 0.0% (99.9% or more in good quality)

BIOCERA 10" A.A Filter Cartridge Reliability of Over 99.9% Quality Assurance

- Test conditions: Filter RO water (pH 6.0) into the BIOCERA 10" A.A filter cartridge up to 3,000L 

  (Flow rate 0.3 LPM, room temperature)

Specification: 

 pH 9.0 or higher

  • Process capability: As a quality management index based on Six Sigma management techniques, product performance meets customer specifications. It indicates how satisfied they are and is expressed as a process capability index (Cpk, Ppk) (1.67 or more: very sufficient, 1.33 or more: sufficient, 1.00 or more: good, 0.67 or more: insufficient, less than 0.67: very insufficient)
  • Cpk: Process capability index obtained using only within-group variation and short-term standard deviation
  • Ppk: Capability index calculated using long-term standard deviation including both within-group and between-group variability
  • PPM: Estimated defect rate (ratio of defects per million products) 0.0% (99.9% or more in good quality)

BIOCERA 11" A.A Filter Cartridge Reliability of Over 99.9% Quality Assurance

- Test conditions: Filter RO water (pH 6.0) into the BIOCERA 11" A.A filter cartridge up to 6,000L 

  (Flow rate 0.3 LPM, room temperature)

Specification: 

 pH 8.5 or higher

  • Process capability: As a quality management index based on Six Sigma management techniques, product performance meets customer specifications. It indicates how satisfied they are and is expressed as a process capability index (Cpk, Ppk) (1.67 or more: very sufficient, 1.33 or more: sufficient, 1.00 or more: good, 0.67 or more: insufficient, less than 0.67: very insufficient)
  • Cpk: Process capability index obtained using only within-group variation and short-term standard deviation
  • Ppk: Capability index calculated using long-term standard deviation including both within-group and between-group variability
  • PPM: Estimated defect rate (ratio of defects per million products) 0.0% (99.9% or more in good quality)

BIOCERA 11" A.A Filter Cartridge Reliability of Over 99.9% Quality Assurance

- Test conditions: Filter RO water (pH 6.0) into the BIOCERA 11" A.A filter cartridge up to 6,000L 

  (Flow rate 0.3 LPM, room temperature)

Specification: 

 pH 9.0 or higher

  • Process capability: As a quality management index based on Six Sigma management techniques, product performance meets customer specifications. It indicates how satisfied they are and is expressed as a process capability index (Cpk, Ppk) (1.67 or more: very sufficient, 1.33 or more: sufficient, 1.00 or more: good, 0.67 or more: insufficient, less than 0.67: very insufficient)
  • Cpk: Process capability index obtained using only within-group variation and short-term standard deviation
  • Ppk: Capability index calculated using long-term standard deviation including both within-group and between-group variability
  • PPM: Estimated defect rate (ratio of defects per million products) 0.0% (99.9% or more in good quality)

BIOCERA 14" A.A Filter Cartridge Reliability of Over 99.9% Quality Assurance

- Test conditions: Filter RO water (pH 6.0) into the BIOCERA 14" A.A filter cartridge up to 9,000L 

  (Flow rate 0.3 LPM, room temperature)

Specification: 

 pH 8.5 or higher

  • Process capability: As a quality management index based on Six Sigma management techniques, product performance meets customer specifications. It indicates how satisfied they are and is expressed as a process capability index (Cpk, Ppk) (1.67 or more: very sufficient, 1.33 or more: sufficient, 1.00 or more: good, 0.67 or more: insufficient, less than 0.67: very insufficient)
  • Cpk: Process capability index obtained using only within-group variation and short-term standard deviation
  • Ppk: Capability index calculated using long-term standard deviation including both within-group and between-group variability
  • PPM: Estimated defect rate (ratio of defects per million products) 0.0% (99.9% or more in good quality)

BIOCERA 10" Undersink A.A Filter Cartridge Reliability of Over 99.9% Quality Assurance

- Test conditions: Filter RO water (pH 6.0) into the BIOCERA A.A filter cartridge up to 10,000L 

(Flow rate 1.5 LPM, Room temperature)

Specification: 

 pH 8.5 or higher

  • Process capability: As a quality management index based on Six Sigma management techniques, product performance meets customer specifications. It indicates how satisfied they are and is expressed as a process capability index (Cpk, Ppk) (1.67 or more: very sufficient, 1.33 or more: sufficient, 1.00 or more: good, 0.67 or more: insufficient, less than 0.67: very insufficient)
  • Cpk: Process capability index obtained using only within-group variation and short-term standard deviation
  • Ppk: Capability index calculated using long-term standard deviation including both within-group and between-group variability
  • PPM: Estimated defect rate (ratio of defects per million products) 0.0% (99.9% or more in good quality)

BIOCERA 10" Undersink A.A Filter Cartridge Reliability of Over 99.9% Quality Assurance

- Test conditions: Filter RO water (pH 6.0) into the BIOCERA A.A filter cartridge up to 10,000L 

(Flow rate 1.5 LPM, Room temperature)

Specification: 

 pH 9.0 or higher

  • Process capability: As a quality management index based on Six Sigma management techniques, product performance meets customer specifications. It indicates how satisfied they are and is expressed as a process capability index (Cpk, Ppk) (1.67 or more: very sufficient, 1.33 or more: sufficient, 1.00 or more: good, 0.67 or more: insufficient, less than 0.67: very insufficient)
  • Cpk: Process capability index obtained using only within-group variation and short-term standard deviation
  • Ppk: Capability index calculated using long-term standard deviation including both within-group and between-group variability
  • PPM: Estimated defect rate (ratio of defects per million products) 0.0% (99.9% or more in good quality)

BIOCERA 10" Undersink A.A Filter Cartridge Reliability of Over 99.9% Quality Assurance

- Test conditions: Filter RO water (pH 6.0) into the BIOCERA A.A filter cartridge up to 10,000L 

(Flow rate 1.5 LPM, Room temperature)

Specification: 

 pH 9.5 or higher

  • Process capability: As a quality management index based on Six Sigma management techniques, product performance meets customer specifications. It indicates how satisfied they are and is expressed as a process capability index (Cpk, Ppk) (1.67 or more: very sufficient, 1.33 or more: sufficient, 1.00 or more: good, 0.67 or more: insufficient, less than 0.67: very insufficient)
  • Cpk: Process capability index obtained using only within-group variation and short-term standard deviation
  • Ppk: Capability index calculated using long-term standard deviation including both within-group and between-group variability
  • PPM: Estimated defect rate (ratio of defects per million products) 0.0% (99.9% or more in good quality)

BIOCERA 20" Slim A.A Filter Cartridge Reliability of Over 99.9% Quality Assurance

- Test conditions: Filter RO water (pH 6.0) into the BIOCERA 20" Slim A.A filter cartridge up to 50,000L 

  (Flow rate 5 LPM, room temperature)

Specification: 

 pH 8.5 or higher

  • Process capability: As a quality management index based on Six Sigma management techniques, product performance meets customer specifications. It indicates how satisfied they are and is expressed as a process capability index (Cpk, Ppk) (1.67 or more: very sufficient, 1.33 or more: sufficient, 1.00 or more: good, 0.67 or more: insufficient, less than 0.67: very insufficient)
  • Cpk: Process capability index obtained using only within-group variation and short-term standard deviation
  • Ppk: Capability index calculated using long-term standard deviation including both within-group and between-group variability
  • PPM: Estimated defect rate (ratio of defects per million products) 0.0% (99.9% or more in good quality)

BIOCERA 20" Big A.A Filter Cartridge Reliability of Over 99.9% Quality Assurance

- Test conditions: Filter RO water (pH 6.0) into the BIOCERA 20" Big A.A filter cartridge up to 150,000L 

  (Flow rate 10 LPM, room temperature)

Specification: 

 pH 8.5 or higher

  • Process capability: As a quality management index based on Six Sigma management techniques, product performance meets customer specifications. It indicates how satisfied they are and is expressed as a process capability index (Cpk, Ppk) (1.67 or more: very sufficient, 1.33 or more: sufficient, 1.00 or more: good, 0.67 or more: insufficient, less than 0.67: very insufficient)
  • Cpk: Process capability index obtained using only within-group variation and short-term standard deviation
  • Ppk: Capability index calculated using long-term standard deviation including both within-group and between-group variability
  • PPM: Estimated defect rate (ratio of defects per million products) 0.0% (99.9% or more in good quality)

BIOCERA A.A 11" Water Filter Quality Assurance

(Standard Value: Over pH 9.0)

BIOCERA A.A Water 11” Filter Reliability of over 99.9% Quality Assurance

Test Condition: RO inlet water pH 6.5 through Biocera A.A 11" water filter, up to 6,000 liters (flow rate: 0.3 LPM, room temperature)


BIOCERA A.A 11" Water Filter Quality Assurance

(Standard Value: Over pH 9.0)

BIOCERA A.A Water 11” Filter Reliability of over 99% Quality Assurance

Test Condition: RO inlet water pH 6.5 through Biocera A.A 11" water filter, up to 6,000 liters (flow rate: 0.3 LPM, room temperature)


Sign up for our newsletter.

Receive our deals and events.

BIOCERA CO LTD, 

 C-2F, Korea Bio Park, 700, Daewangpangyo-ro, 

Bundang-gu, Seongnam-si, Gyeonggi-do, Korea 13488


Tel: +82 31-628-0600

Inquiry:  biocera@biocera.co.kr

Biocera New York Office: biocera.nyc@gmail.com


To download our e-catalog, please send inquiry email to biocera@biocera.co.kr

Copyright © 2022 BIOCERA Co., Ltd  All rights reserved.

Sign up for our newsletter. 

Receive our deals and events for the upcoming events.

[Headquarter] Bldg. C-2F, Korea Bio Park, 700, Daewangpangyo-ro, Bundang-gu, Seongnam-si, Gyeonggi-do, Republic of Korea, (zip 13488) | Tel. (82) 31-628-0600 | Fax. (82) 31-628-0619 |  Email. biocera@biocera.co.kr | [New York Office] Email. biocera.nyc@biocera.co.kr 

            Facebook   |   YouTube   |   LinkedIn   |   Instagram